Curing Press

Usage

The machine is mainly used for tire-curing, especially for radial tires. It is designed as circular girth-oriented wedge locking system with hydraulic power. Manual or automatic control system with conventional relay or PLC.

Molds

Specifications

Tire size range	125sR—12.00R20
Maximum inner pressure	<1.8 MPa
Power supply	AC380V, AC220V, 50HZ
Compressed air source	0.3 MPa
No. of Tread Segments	6

Type	1200		1120
Tire size range	11.00R20	12.00R20	9.00R20	10.00R20
Dimension	2600X2200X1390 mm		2300X2050X1220
Station pressure	6—10 MPa
Power	1.5 kw

Curing Press

Usage

The machine is suitable for OTR diagonal tire-curing.

Characteristics

1. The outer molds are made of high quality casting steel that can stand for higher inner pressure without distortion.

2. The inner molds can be replaced with different sizes to a certain range.

3. Using hydraulic pressure automatic locking system, the upper cup mold moves steadily. Its operation is simple, safe and quick.

Specifications

Tire size range	17.5-25~~23.5-25
Maximum inner pressure	<1.8 MPa
Steam pressure	<0.6 Mpa
Dimension	2850X2500X3250
Station pressure	8 MPa
Power	11 kw
Weight	~1.2
Power supply	AC380V, AC220V, 50HZ
Compressed air source	0.8 MPa

Giant OTR Tire Press

Usage:

The machine is used for giant OTR tire-curing.

Specifications

Tire size range	27.00R49—40.00R57
Maximum inner pressure	<3.3 MPa
Steam pressure	<0.7 MPa
Power supply	AC380V, AC220V, 50HZ
Power ( non-continuous operation)	22 kw

Type	4460	4250	4050	3850
Tire size range	40.00R57	37.00R57	36.00R51	27.00R49
Dimension	5490X4200X7380	5280X4030X7180	5080X3830X7180	4650X3600X6840
Station pressure (MPa)	26.0 (high pressure pump)	24.0 (high pressure pump)	21.5 (high pressure pump)	23.0 (high pressure pump)
Station pressure (MPa)	10 (low pressure pump)
Nominal mold locking force (kN)	33,060	30,520	27340	17,330

Tire Retreading Machines >> Curing Press